A.
Wonderware Kepware Server:
To be able to use the Wonderware Kepware server you need a server equipped with an ATA/ATAPI Serial converter. The server normally comes with a native driver.
In some cases however a further driver can be required. Therefore it is better to check the technical manual of your Kepware Server to find out if you need to use an add-on driver.
Please have a look at the following drivers.
Siemens Atsddedm Driver:
ATS Driver:
The ATS driver requires a USB interface. Therefore a special driver for the Wonderware Kepware Server is needed.
Siemens N-ELRHI Driver:
This driver needs an USB interface. Therefore it is necessary to use the driver from the Siemens N-ELRHI/SPI converter.
An easy way to do this is to download the N-ELRHI driver from the Siemens Web site.
At the time of this release the current version of the driver is 00.09.44.
Kepware SFFIP Driver (Flexible Input/Output):
This is the driver for the Flexible Input/Output interface of the Kepware SFFIP module. The driver is made for the SFFIP connections.
Kepware Intouch Driver:
This is the driver for the Intouch part of the Siemens Wonderware ATS.
ATS Driver:
The ATS driver requires a serial port. Therefore a driver for the Siemens Serial/MIDI to Serial converter is needed.
Serial Converter Driver:
The Serial Converter driver can be used to connect the Siemens Serial/MIDI to Serial converter to your system.
Wonderware SPF Driver:
The SPF driver needs a serial port. Therefore a driver for the Siemens Serial/MIDI to Serial converter is needed.
Intouch Driver:
This is the driver for the Intouch part of the Siemens Wonderware ATS.
Flexible Input/Output Driver:
This is the driver for the Flexible Input/Output interface of the Kepware SFFIP module.
ATI Driver:
This is a driver for the Wonderware Intouch ATA.
How to connect via USB to the Wonderware ATA or ATAPI Server:
1.
2.
Get your Siemens Kepware drivers (N- be359ba680
Related links: